Solar Street Light 100w

Solar Street Light 100w

With high brightness of 17000lm, the Solar Street Light 100w has been designed to provide a light source for the urban and rural street areas. Its Solar Panel is made of a monocrystalline silicon solar panel, which can work stably on rainy days and cold days. Digital power controllers can protect circuits better.

What is Solar Street Light 100w

 

 

With high brightness of 17000lm, the Solar Street Light 100w has been designed to provide a light source for the urban and rural street areas. Its Solar Panel is made of a monocrystalline silicon solar panel, which can work stably on rainy days and cold days. Digital power controllers can protect circuits better.

 

Benefits of Solar Street Light 100w

 

 

Environmental Protection
Compared with traditional street lamps, solar street lamps rely primarily on sunlight during the day to convert light into electricity, which is then used for illumination at night. They require no other conventional energy sources, and solar energy is recognized as one of the most environmentally friendly energy sources in the world. In terms of pollution, the environmental impact of solar street lamps is almost zero, with the only potential source of pollution being the battery. However, this impact is minimal, and when the battery reaches the end of its service life, it can be recycled.

Safety
Utility street lamps generally operate on AC 220V or 380V power. If these systems become damaged or develop a fault, they can present risks such as electric shock or fire. In contrast, solar street lamps use DC 12–24V low-voltage power, offering stable voltage, reliable operation, and eliminating the risk of safety hazards.

Energy Saving
Solar street lamps are powered entirely by sunlight-an inexhaustible energy source for humanity. Conventional utility street lamps rely on alternating current, which requires significant consumption of traditional energy sources to provide lighting at night.

Low Investment in the Long Run
At first glance, the purchase price of utility street lamps is lower than that of solar street lamps. However, utility systems require additional investments in control boxes, cables, engineering work, operating costs, and ongoing maintenance. In contrast, solar street lamps require a one-time investment, have negligible maintenance costs, offer brighter illumination, and consume less energy. On average, the initial investment can be recovered in about two years.

Easy Installation
Installing solar street lamps involves minimal construction work. There is no need for trenching, underground wiring, or building nearby power stations. Installation simply requires a cement base and secure mounting, often using stainless steel fixtures. Integrated solar street lamps can even be installed on existing poles or walls. The installation process takes no more than 10 minutes per unit, and more than 50 units can be installed in a single day.

Wide Range of Installation and Application
The installation of solar street lamps is virtually free from geographical restrictions. Whether in mountainous areas, grasslands, fields, or anywhere with sunlight, solar street lamps can be installed. They are especially suitable for green landscape lighting, upscale residential areas, outdoor lighting for tourist attractions, coastal landscape enhancement, industrial development zones, mining facilities, and the outdoor spaces of major colleges and universities.

 

 

Why Choose Us
 
 
 

Customer Satisfaction

We are committed to delivering high quality services that exceed our clients' expectations. We strive to ensure that our clients are satisfied with our services and work closely with them to ensure their needs are met.

 
 

One-stop service

We promise to provide you with the fastest reply, the best price, the best quality, and the most complete after-sales service.

 
 

Quality Assurance

We have a rigorous quality assurance process in place to ensure that all our services meet the highest standards of quality. Our team of quality analysts checks each project thoroughly before it is delivered to the client.

 
 

Competitive Pricing

We offer competitive pricing for our services without compromising on quality. Our prices are transparent, and we do not believe in hidden charges or fees.

 

 

 
100W Solar Street Light Specification
 

A 100W solar street light is a solar-powered lighting system with a maximum power output of 100 watts. It uses solar panels to convert sunlight into electrical energy, which is then stored in a battery. The stored energy powers the street light at night. With its 100W LED power, this super-bright solar street light is typically used for outdoor applications such as street lighting, parking lots, pathways, and other public areas. It offers an efficient and sustainable alternative to traditional grid-powered street lights, reducing energy consumption and minimizing environmental impact.

 

Components

10M Pole 100W LED Solar Street Light specs

Life Span

QTY

1

Solar Panel

340W/36V,Mono Crystalline,>22.12% Efficiency.

>25years

1pc

2

LED Lamp

100W-24V,Phillips Lumileds 3030,160LM/W,3700K-6500K,IP66-IP68

>80,000hrs

1pc

3

Lighting Pole

10M conical,single arm,Q235 Steel,Hot dip galvanized,Powder coating,Rust Proof.

>25years

1pc

4

Solar Panel Bracket

Detachable,Q235 steel,Hot dip galvanized,Powder coating,Rust Proof.

>25years

1pc

5

Foundation Kit

Detachable,Q235 steel.

>25years

1pc

6

Charge Controller

15A, Automatic dusk to dawn auto dimming

>8years

1pc

8

Battery

Option 1:150AH/12V*2PCS GEL battery,Free Maintenance,Deep cycle,Gel type.

>10years

1pc

Option 2:102AH/25.6V LifePO4 battery,Lighter Weight,Longer Cycle Lifespan,Lithium type.

5~10years

1pc

9

Battery Box

GEL battery:Underground battery box

>5years

1pc

Lithium battery:Top or hang on the pole,hold 1 battery.

>10years

1pc

10

Cables

2*1.5mm²,from LED lamp to controller

>20years

3-8M

2*4mm²,from solar panel to controller

2-8M

2*4mm²,from solar battery to controller

2-5M

Working :10-12hrs/night at intelligent working mode*2-3 overcast days,5.0KWH/M²/day.

Noted: Pole height 3M to 12M for solar street light choosing,15M-50M for high mast pole.

LED power 15W to 150W for solar street light choosing.

Customized design is available.

Solar street light with remote function is optional.

 

Components of Solar Street Lights

Solar street lights are becoming increasingly popular due to their energy efficiency, cost-effectiveness, and environmental benefits. These lights are made up of several components, each of which plays a crucial role in their operation. Here are the main components of solar street lights: 

 

Solar Panels
The solar panel is the most important component of a solar street light. It is responsible for converting sunlight into electricity, which is then used to power the street light. Solar panels consist of photovoltaic (PV) cells that absorb sunlight and convert it into direct current (DC) electricity. The size and wattage of the solar panel determine the amount of electricity generated, which in turn determines the brightness and runtime of the LED lights.

 

Battery
The battery is another critical component of a solar street light. It stores the electricity generated by the solar panel during the day and powers the LED lights at night. The battery is typically made of lithium-ion, lead-acid, or nickel-cadmium (NiCd) and must have sufficient capacity to provide power throughout the night. The battery' s capacity is measured in ampere-hours (Ah), and the higher the Ah rating, the longer the runtime of the street light.

 

LED Lights
LED lights are used in solar street lights because of their high energy efficiency, long lifespan, and low maintenance requirements. They provide bright illumination for the street light while consuming very little energy. The LED lights are connected to the battery and controller and turn on automatically at dusk and turn off at dawn.

 

Controller
The controller is the brain of the solar street light system. It manages the flow of energy between the solar panel, battery, and LED lights to ensure optimal performance and efficiency. The controller has several functions, including regulating the battery' s charge and discharge cycle, controlling the LED light' s brightness, and protecting the battery from overcharging and deep discharge.

 

Pole and Mounting Structure
The pole and mounting structure provide support for the solar panel, battery, LED lights, and controller, and also secure the street light to the ground. The pole is typically made of steel or aluminum and must be strong enough to withstand harsh weather conditions. The mounting structure is designed to keep the solar panel at the optimal angle for sunlight absorption and prevent theft and vandalism.

 

Sensors
Sensors are an optional component of solar street lights that detect movement and trigger the light to turn on or increase its brightness. Motion sensors, which detect heat or movement within their range, are the most common type of sensor used in solar street lights.

When movement is detected, the motion sensor sends a signal to the controller to turn on the LED lights or increase their brightness. Light sensors are also used in some solar street lights to detect ambient light levels and adjust the brightness of the LED lights accordingly.

Solar Street Light 100w
How High Should Solar Street Lights Be

The height of smart solar LED lights can vary depending on factors such as the width of the road or area to be illuminated, the desired lighting level, and local regulations or standards. In general, solar street lights are installed at a height that ensures sufficient illumination coverage while maintaining safety and visibility.

For residential streets or pathways, the typical height range for solar street lights is around 10 to 15 feet (3 to 4.5 meters), providing adequate lighting without excessive glare or shadows. In commercial or urban areas with wider roads or higher lighting requirements, the height can be 20 feet (6 meters) or more.

It is important to consider factors such as light distribution, uniformity, and potential obstructions when determining the appropriate height for solar street lights. Consulting professionals or following local guidelines can help ensure the lights are installed at the optimal height for the specific application.

 

What Are the Post-Maintenance Methods of Solar Street Lights

 

Solar Street Light Maintenance Guide

Solar street lights are a sustainable and efficient way to illuminate streets while reducing our carbon footprint. These eco-friendly lighting solutions harness the sun's energy to provide nighttime illumination. However, like any technology, they require regular maintenance to ensure optimal performance and longevity.

 

1. Regular Cleaning and Inspection

Dirt, dust, and debris can accumulate on solar panels, reducing their efficiency. Regular cleaning helps maintain maximum energy conversion.

Cleaning Schedule: Clean the panels at least once a month, or more often if local conditions cause faster buildup.

Gentle Cleaning: Use a soft cloth or sponge with mild detergent and water. Avoid abrasive materials that may scratch the surface.

Damage Check: While cleaning, inspect for cracks, loose connections, or other visible damage. Address any issues immediately to prevent further deterioration.

 

2. Battery Maintenance

The battery stores energy for nighttime lighting and is critical to the system's reliability.

Inspection: Check regularly for corrosion, leakage, or physical damage. Replace faulty batteries immediately.

Charging/Discharging: Monitor charging and discharging performance. If performance drops significantly, consider a replacement.

Cleaning Terminals: Keep terminals clean and corrosion-free. If needed, use a baking soda and water solution for cleaning.

 

3. LED Light Maintenance

LEDs are long-lasting and efficient but still need periodic care.

Testing: Test LEDs regularly to ensure proper operation. Replace any non-functioning units promptly.

Cleaning: Wipe down fixtures to remove dust and debris that may reduce brightness.

 

4. Controller and Sensor Checks

The controller and sensors regulate lighting operation and energy use.

Controller Inspection: Check for loose wires, damaged components, or error indicators. Repair or replace as needed.

Sensor Calibration: Ensure light and motion sensors are calibrated to trigger lighting appropriately and save energy.

 

5. Pole and Mounting Hardware Inspection

Strong, stable mounting is essential for safety and performance.

Visual Check: Look for rust, corrosion, or structural damage to poles and hardware. Repair or replace affected parts.

Tightening: Periodically re-tighten bolts and nuts to prevent loosening from wind or vibration.

 

6. Record Keeping

Maintain logs of cleaning, inspections, component replacements, and repairs. This helps track performance and spot recurring issues early.

 

Types of Solar Street Lights

The solar street light market offers a diverse range of options to cater to various needs and applications. Let's dive into the three main types of solar street lights:

 
 

All-in-One Solar Street Light

These self-contained units combine all the necessary components – solar panel, battery, and LED light – into a single, integrated system. This design simplifies installation and reduces the overall footprint, making them an ideal choice for areas with limited space or where a clean, streamlined appearance is desired.

 
 
 

All-in-Two Solar Street Light

In this configuration, the solar panel and battery are housed in a separate unit, while the LED light is installed as a distinct component. This modular approach allows for more flexibility in placement and can be advantageous in situations where the solar panel needs to be positioned in a specific orientation to maximize sun exposure.

 
 
 

Split Solar Street Light

As the name suggests, this type of solar street light separates the solar panel, battery, and LED light into three distinct units. This design offers enhanced versatility, as the components can be installed in different locations to optimise performance and aesthetics.

 

 

 
What Are The Materials Of Solar Street Lights
 

 

Battery Material

The battery of solar street lights stores the energy converted from solar energy, so the battery material directly affects the energy storage effect and service life. The commonly used battery materials currently include lead-acid batteries, lithium batteries, and nickel hydrogen batteries. Lead acid batteries are a mature, economical and practical choice, but they are large in size, heavy in weight, and require regular maintenance; Lithium batteries have advantages such as small size, high energy density, and long lifespan, but their cost is relatively high; Although nickel hydrogen batteries are environmentally friendly, they have relatively low battery capacity and charge discharge efficiency. Based on the usage needs and budget considerations of solar street lights, suitable battery materials can be selected according to the actual situation.

Lamp Shade Material

The lampshade of solar street lights is mainly used to protect lamps and scatter light, and common materials include PC, acrylic, and glass. PC material has the characteristics of impact resistance and good weather resistance, suitable for harsh environments; Acrylic material has good transparency and relatively low price, but slightly lower impact resistance; The glass material has excellent transparency, but is relatively fragile. Select appropriate lampshade materials based on the installation environment and actual needs of street lights to ensure the performance and lifespan of the lamps.

Controller Material

The controller of solar street lights plays a role in controlling and protecting batteries, controlling light and time, and the selection of materials has a significant impact on the stability and reliability of the controller. The commonly used controller materials include aluminum alloy, plastic, and stainless steel. Aluminum alloy has the characteristics of good heat dissipation and strong corrosion resistance, making it suitable for places with long-term operation; Plastic materials are cheap, but they are prone to deformation in high-temperature environments; Stainless steel material has good corrosion resistance and is suitable for humid environments. Select appropriate controller materials based on the specific usage environment and requirements of solar street lights.

Material of Street Lamp Pole

The pole body of solar street lights is usually made of materials such as stainless steel, aluminum alloy, cast iron, etc. The stainless steel rod body has the characteristics of corrosion resistance and good wind resistance, suitable for humid environments and coastal areas; The aluminum alloy rod body is lightweight, easy to install and maintain, and has high strength and stability; The cast iron rod body is more sturdy and durable, suitable for areas with poor road conditions.

Solar panel material

Solar panels are the core components of solar street lights, and their materials are mainly divided into monocrystalline silicon, polycrystalline silicon, and amorphous silicon. Monocrystalline silicon battery panels have high conversion efficiency and stable performance characteristics, but their production costs are relatively high; The conversion efficiency of polycrystalline silicon battery panels is slightly lower, but they are more cost-effective; The manufacturing process of amorphous silicon battery panels is relatively simple, with high flexibility, and is suitable for the production of flexible battery panels. It is very important to choose the appropriate material for the battery panel based on actual needs and economic considerations.

 

Our Factory

 

 

Our ambition to establish ourselves as an industry leader in innovative, highly reliable, and cost-effective solar lighting solutions-combined with exceptional customer service-is supported by our investment in both R&D and a state-of-the-art production facility. Our 6,300 m² factory houses a team of 10 engineers and more than 100 skilled workers, enabling us to test our products under the harshest conditions, enhance them when necessary, and maintain strict quality control before delivery. This facility also allows us to efficiently manage production flow and offer customized solutions, tailoring our standard products to meet the specific requirements of each client's project.

 

 
FAQ
 

 

Q: What is the best wattage for solar street lights?

A: The wattage of a solar street light can vary greatly depending on the size and type of the light. Generally, a solar street light will range from 10 to 150 watts.

Q: What is solar street light?

A: Solar street lighting system uses the photovoltaic technology to convert the sunlight into DC electricity through solar cells. The generated electricity can either be used directly during the day or may be stored in the batteries for use during night hours.

Q: Are solar street lights worth it?

A: Cost-Effective: One of the primary advantages of solar street lights is that they are cost-effective in the long run. Although the initial investment for purchasing and installing the lights may be higher, they do not require any additional costs such as wiring, trenching, and utility bills.

Q: How many years does a solar street light last?

A: The lifespan of a solar street light can vary depending on various factors, including the quality of components, maintenance practices, and environmental conditions. On average, a well-designed and properly maintained solar street light can have a lifespan of 10 to 20 years.

Q: Do solar street lights work at night?

A: Solar cells do not produce any power after sundown and solar street lights work from dusk to dawn using the electricity generated during the day. The lights automatically shut off at daybreak when the photoreceptors sense presence of sunlight. This process keeps repeating every day.

Q: Where is the battery in a solar street light?

A: This battery can be stored either on the top of the solar pole or at the bottom. This solution has many practical benefits, while the battery is secured and out of the reach for potential thefts, it also provide much better visual and aesthetic look of the entire Solar LED Street Light.

Q: How do I know if my solar lights are working?

A: You can completely cover the solar panel to simulate nighttime, which will allow the photocell to trigger the light to turn on and thus test the lights.

Q: Is it worth replacing batteries in solar lights?

A: Extended Lifespan: Replacing worn-out batteries extends the lifespan of your solar lights, allowing you to enjoy their benefits for years to come. Cost Savings: Investing in replacement batteries is often more cost-effective than buying new solar lights, saving you money while maintaining a well-lit outdoor area.

Q: How do you charge a solar street light?

A: Direct sunlight ensures a full charge. You'll then need to remove any packaging material covering the solar panel section of the light. Some solar light panels are designed to fold, so unfold it, check if there's a thin paper film on the panel, and remove it for efficient charging.

Q: What is the difference between solar floodlight and solar street light?

A: Solar led flood lights and solar led street lights can be used as same under some certain conditions, but the actual application area is different. Solar street lamps are mainly used in road lighting, such as community roads, park roads, pedestrian streets, rural roads and so on.

Q: How far apart should solar street light be?

A: Generally, the spacing between each light should be equal to the height of the light multiplied by 2.5. For example, if the height of the light is 10 feet, the spacing between each light should be 25 feet.

Q: How do you size a solar street light?

A: Here are three key factors a properly sized, reliable solar street light depends on: a healthy array-to-load ratio, sufficient battery capacity and backup power, and an efficient LED fixture and operating profile.

Hot Tags: solar street light 100w, China solar street light 100w manufacturers, suppliers, factory, performance of solar led street light, urban solar led street light, industrial solar led street light, new solar led street light, adjustable solar led street light, cost-effective solar led street light

Send Inquiry
Send Inquiry